Product ID:ELMER'S WONDER BOND
MSDS Date:11/19/1988
FSC:8040
NIIN:00N010945
MSDS Number: BHYVV

Emergency Phone: 614-431-6600

Info Phone: 614-431-6600

Cage: HO600

Telephone: 614-431-6600

Cage: HO600

ETHYL 2-CYANOACRYLATE

CAS: 7085-85-0

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES SEVERE BURNS TO EYES.CAUSED
BLINDNESS IN RABBITS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:SEVERE BURNS.EXTREMELY IRRITATING WHEN
TESTED AS IN 16 CFR PART 1500.42.CAUSED BLINDNESS IN
RABBITS.SKIN:IRRIT.PRIMARY IRRIT WHEN TESTED AS IN CFR PART
1500.41.BONDS SKIN INSTANTLY.ABSORPTION:NOT TOXIC WHEN TESTED AS
IN 16 CFR PART 1500.3 C 1 & 2.INGEST/INHAL:NOT TOXIC WHEN TESTED AS
IN 16 CFR PART 1500.3 C 1 & 2.
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:IMMED FLUSH W/ PLENTY OF WATER FOR AT LEAST 15
MIN,HOLDING LIDS APART.CALL MD.SKIN:AVOID VIGOROUS ATTEMPTS TO
REMOVE.APPLY SOLVENT (ACETONE OR NAIL POLISH REMOVER) TO AREA &
PEEL CAREFULLY OR ROL L SKIN APART-DO NOT PULL.INGEST:DILUTE BY
DRINKING LRG QTY OF WATER.IMMED CONT POISON CONTROL CENTER OR
HOSPITAL EMER ROOM FOR ADDITIONAL TREATMENT.INHAL:SUPPORT BRTHG
(GIVE O*2/ARTF RESP) .

Flash Point Method:COC
Flash Point:180F,82C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,"ALCOHOL" FOAM OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .USE WATER SPRAY TO COOL FIRE-EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:COMBUSTIBLE.KEEP AWAY FROM HEAT AND
FLAME.

Spill Release Procedures:ELIM ALL IGNITION SOURCES.LRG QTY:ENCLOSE W/
DIKING MATL TO PVNT SEEPAGE INTO NATURAL BODIES OF WATER,THEN
CONSULT BORDEN INC.SMALL QTY:SOAK UP WITH ABSORBENT MATL & REMOVE
TO CHEM DISP AREA.ALL:RECOV ER FREE LIQ.ABSORB RESIDUE & DISP OF
IAW REGS.
Neutralizing Agent:N/K

Handling and Storage Precautions:KEEP CONTR CLOSED.STORE IN A COOL,DRY
PLACE.EXPOS TO SM AMT OF MOISTURE,EVEN MOISTURE IN AIR,CAUSES
POLYMERIZATION & RENDERS PROD UNUSABLE.(SEE SUPP)
Other Precautions:TO MINIMIZE EMPLOYEE EXPOS:LOCAL EXHAUST
VENT,ENCLOSED SYS DESIGN,PROCESS ISOLATION & REMOTE CONTROL
COMBINED W/ APPROP USE OF PERSONAL PROTECT EQUIP & PRUDENT WORK
PRACTICES.REC CONSULTATION W/ EXPER TS TO DETERMINE IF PROGRAM IS
ADEQUATE.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ENCLOSED SYSTEM DESIGN,PROCESS ISOLATION &
REMOTE CONTROL COMBINED W/ APPROP USE OF PERSONAL PROTECTIVE EQUIP.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
HNDLG/STOR PREC:AVOID SKIN/EYE CONTACT.HANDLE IAW GOOD INDUS HYGIENE &
SAFETY PRACTICES,INCLUDING REMOVAL OF MATL FROM EYES,SKIN & CLTHG &
AVOIDING UNNECESSARY EXPOS.RISK OF DAMAGE AND EFFECTS DEPENDS UPON
DURATION & LEVEL OF EXPOSURE.BEFORE USING OR HANDLING,READ &
UNDERSTAND MSDS.ENTRY RTE:INHAL/SKIN/INGEST .

Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:1.05 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID WITH SHARP ACIDIC ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
WATER
Stability Condition to Avoid:NORMALLY STABLE,BUT MAY BECOME UNSTABLE AT
HIGH TEMPERATURES OR MAY REACT WITH WATER.
Hazardous Decomposition Products:N/K
Conditions to Avoid Polymerization:EXPOSURE TO SMALL AMOUNTS OF
MOISTURE,EVEN MOISTURE IN AIR,CAUSES POLYMERIZATION AND RENDERS
PRODUCT UNUSABLE.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .EMPTY CONTAINER:MAY CONTAIN
EXPLOSIVE VAPORS.DO NOT CUT,PUNCTURE OR WELD ON OR NEARBY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.